Programming software SPM 2000/1000 telecontrol
Download programming software SPM 2000/1000 telecontrol, V1.41 03/09/2021
SHA 256: cc483cbf843f283bc71700d3586a6bdd999155551f31baebadcd445aaccdd39d
Firmware update SPM 2000 / SPM 200 digi
Update via USB stick. Please read operation manual about updating firmware.
Please read the software overview to find out the minimum required software version for controlling a module.
Update the modules to the latest firmware version offered here. Download and store the file onto your PC first and transfer the software to your headend via a serial POLYTRON cable (article no.7466610) or via USB.
The cable for SPM-DQT, article no. 7466611
Some features as e.g. switching off the 16:9 function will only be supported with the base unit's software version B.5 or newer.
We recommend to update the base unit to software version B.5. or newer.
If the base unit has an older software version, for example SP2.3 you have to order a new control unit in order to be able to update the base unit.
Firmware update SPM-STCT-CI, V1.05 (04/09/2019)
Update base unit SPM 1000 digi / plus / telecontrol
The software version of the base unit has to match to the appropriate software version of the modules. Otherwise a proper operation of the modules is not possible. Please pay attention to the specifications in the software matrix PDF.
To update the base unit's software, the EPROM has to be replaced. How to order a new EPROM:
EPROM SPM 1000 plus: Article no. 9285220
EPROM SPM 1000 digi: Article no. 9285230
EPROM SPM 1000 telecontrol: Article no. 9285240